| Model | 3909 |
| | |
| Vacuum Motor Specifications | |
| | |
| Tangential By-pass discharge | l |
| Flow Through discharge | |
| Double ball bearings | l |
| Diameter of Motor mm | 183 |
| Air Watts | 610 |
| Airflow l/s (max.) | 49 |
| Sealed Vacuum mm H2O (max.) | 3750 |
| RPM @19mm working orifice | 18900 |
| Label Rated Electrical Watts | 1800 |
| Noise Level dbA with Silencer @ 3m | 70.5 |
| Temperature Sensistive Thermal Protector | |
| Control Circuit 12 V DC | l |
| Control Current 100mA | l |
| Nominal Voltage 240 V AC | l |
| Nominal Frequency 50 Hertz | l |
| | |
| Power Unit Physical Specifications | |
| | |
| Overall Height (mm) | 840 |
| Overall Diameter (mm) | 310 |
| Overall Weight (kg) | 9.5 |
| Dual Filtration Compatible System | l |
| Cyclonic Filtration (Standard) | l |
| HFPC Filter Cartridge | l |
| Filter Bag Filtration | |
| Silencer for Exhaust | l |
| Left & Right ducting entry points | l |
| Direct Inlet point with On/Off switch | l |
| Wall Mounting of Power Unit | l |
| Body Housing Construction | ABS |
| Dirt Capacity litres | 25 |
| | |
| Authority Approvals / Origin | |
| | |
| “C” Tick Compliance EMC – AS/NZS 1044 | l |
| Made in Australia | l |
| | |
| Installation Recommendations * | |
| | |
| Size of Building up to Squares | 90 |
| Number of Inlet Points | 12 |
| Number of Aux Points | 6 |
| Working Hose length – up to metres | 15 |
| Max distance to furtherest point metres | 120 |
| Hide-A-Hose Compatible | l |
| | |
| | |
| | |
| Notes:- | |
| | |
| Instalaltion Recommendations shown is only an approxiate guide and may vary to actual construction specifications and layout of building. Please consult with your installer for appropriate model. |
| | |
| Specifications subject to change without notice. EOR |
