Model | FB200 |
| |
Vacuum Motor Specifications | |
| |
Tangential By-pass discharge | ● |
Flow Through discharge | ▪ |
Double ball bearings | ● |
Diameter of Motor mm | 145 |
Air Watts | 405 |
Airflow l/s (max.) | 50 |
Sealed Vacuum mm H2O (max.) | 2450 |
RPM @19mm working orifice | 21200 |
Label Rated Electrical Watts | 1400 |
Noise Level dbA with Silencer @ 3m | 68.5 |
Temperature Sensistive Thermal Protector | ● |
Control Circuit 12 V DC | ● |
Control Current 100mA | ● |
Nominal Voltage 240 V AC | ● |
Nominal Frequency 50 Hertz | ● |
| |
Power Unit Physical Specifications | |
| |
Overall Height (mm) | 705 |
Overall Diameter (mm) | 330 |
Overall Weight (kg) | 6.7 |
Dual Filtration Compatible System | ▪ |
Cyclonic Filtration (Standard) | ▪ |
HFPC Filter Cartridge | ▪ |
Filter Bag Filtration | ● |
Silencer for Exhaust | ● |
Left & Right ducting entry points | ● |
Direct Inlet point with On/Off switch | ▪ |
Wall Mounting of Power Unit | ● |
Body Housing Construction | ABS |
Dirt Capacity litres | 20 |
| |
Authority Approvals / Origin | |
| |
“C” Tick Compliance EMC – AS/NZS 1044 | ● |
Made in Australia | ● |
| |
Installation Recommendations * | |
| |
Size of Building up to Squares | 30 |
Number of Inlet Points | 4 |
Number of Aux Points | 2 |
Working Hose length – up to meters | 12 |
Max distance to farthest point meters | |
Hide-A-Hose Compatible | ▪ |
| |
| |
| |
Notes:- | |
| |
| | |
Installation Recommendations shown is only an approximate guide and may vary to actual construction specifications and layout of building. Please consult with your installer for appropriate model. |
| |
Specifications subject to change without notice. EOR | |
